Recent Posts

Pages: [1] 2 3 4 ... 10
1
How it works? . . . Q & A / I don't understand how the side neutralizers work?
« Last post by Sam on December 08, 2018, 04:10:21 pm »
I can understand the neutralizers for top and bottom, but don't understand how the side neutralizers work. 

How can it go straight out then make a sharp turn and do the other wall, and the other side neutralizer is doing the exact same thing?  You would think you would need a neutralizer for each wall, so 4 and then the top and bottom for 6 neutralizers all together.
The side neutralizers how far do they extend before making the sharp left or sharp right?  What makes it even turn in the first place – how is it programmed to extend so far then turn and go so far?

 How far do the top and bottom Neutralizers extend?

==========================

>>> Based on common knowledge you should have 4 side protection Neutralizers. Exactly it may be 3 of them (triangle configuration). With 4 you can design any 4 corners shape in the range of Neutralizers This is more expensive option.

Dual protection module is a combination of 2 AN-8SCV Neutralizers in one enclosure. In addition, all Neutralizers act based on Quantum Mechanics rules. They are different in comparison to common knowledge based on physics from school. E.g. Two colliding protection walls from two Neutralizers are not passing through each other, but they are snapping together, so walls created are protecting anything inside and not expanding outside (like a regular walls) the same is combination of the protection from above with walls and from below with the same walls resulting “box like” protection surrounding protected area.

https://www.microalpha.com/side_1.html
---------------------------------------

How far do the top and bottom Neutralizers extend?

>>> It is depending on version of Neutralizer and the walls from Side Protection Neutralizers. They are not expanding behind “walls”. If they are alone it depends on version of Neutralizer (starts from radius of 6 m /19.5 ft to over 2 km). Without Side Protection Neutralizers protection of them is circular and horizontal. With side protection Neutralizers is defined by shape of the “walls”

https://www.microalpha.com/total.html
2
" Dampness ... Before buying it I need to know if they can work if they are placed on the floor and not below (I think you can place below the floor for the way Canadian/American house are built) ..."

========
Yes, they will work from the elevation of the position they are placed. AN-7CV2D - you can place it in the position below elevation of the lowest floor - in the whole in the ground surface - the best elevation is on the level of the base of fundament of your house (outside of your house). In such case Neutralizer must be placed in the sealed container and the connection to grounding point must be protected against moisture. Also, Neutralizer need to be aligned horizontally.
========

One neutralizer for dampness AN-7CV2D can be placed in the central location on the basement floor and need to be grounded to electric grounding point. This one will cover your whole house area.

Or for your house we suggest to have a "Total Home Protection" set. This set provides protection against dampness (includes mentioned above Neutralizer AN-7CV2D).

Set of Neutralizers provides total defense against any Cell-Towers, Antennas or other EMFs from surrounding your house plus dampness elimination.
 
If you have Cell Tower near your home, you are living, eating and sleeping in wireless microwave radiation. These radiations are continually. Even if you don't have Wi-Fi, chances are that those microwave radiations penetrating your home if a close neighbor does. MicroAlpha products provide ultimate EMF protection filtering harmful parts of EMFs so they become harmless.

https://www.microalpha.com/dampness.html

https://www.microalpha.com/total.html
3
I would like to know if your product neutralizer can reduce level of high frequency pulsating radio waves and scalar waves? Can it be a cut to that kind of waves?
===============================

Reducing those waves will not do much.  You will be exposed anyway to them. Our products (Neutralizers) make them harmless. This is more than enough to do the job.

I understand that you are more than sensitive to mentioned waves.

You should have “Total Home Protection” set https://microalpha.com/total.html
and “Personal” protection device https://microalpha.com/peace_ball.html

We are helping people with familiar to yours problems.

All other solutions are only a substitute to proper one and our customers try all of them before they use our products. Now with MicroAlpha EMF protection products they are back to normal life.

For this type sensitiveness takes from few months to a few years for total recovery depends on severity of your problems.

Also, with other semi-solutions your health will go worst in time (from our clients’ observations).

Here is the link to “semi-solutions” page http://microalpha.com/semi-solutions.html
4
On each page with products (on the bottom of it) you can find prices and links to buy explained on this page products using Pay Pal services. You can buy (order) one product and finalize it or you can add it to the cart and go shopping for more. Also, you can send us email the same way (using form on each page bottom) with list of the items you would like to purchase and we will send you ready invoice, then you can process through PayPal the same way. You don't need account with PayPal. You can use credit or debit card without PayPal account.

Check:
https://www.microalpha.com/#wa-anchor-jo0uakyz3qc0u8
https://www.microalpha.com/total.html
https://www.microalpha.com/products.html

Contact us – on the form of the bottom of each page or https://www.microalpha.com/contact_us.html
5
How it works? . . . Q & A / The top neutralizer does it come with a long power cord?
« Last post by Mel on December 08, 2018, 03:00:45 pm »
The top neutralizer does it come with a long power cord so can plug into a socket near the floor?
================================


All Neutralizers are equipped with green wire (approximately 2m long) ended with metal rounded connector. You need adaptation cable for using power outlet instead of grounding to the metal body of any connected to electric outlet equipment (e.g. fridge, water heater . . .etc.).  We can provide each Neutralizer with such extension. Extension cable price - $ 5.00 CAD for each cable. Grounding cable with extension exceed 4m.

https://www.microalpha.com/side_1.html
6
How it works? . . . Q & A / Can all 4 neutralizers need to be plugged in?
« Last post by Mel on December 08, 2018, 02:59:24 pm »
Yes, every Neutralizer need to be connected to the grounding point.

https://www.microalpha.com/total.html
https://www.microalpha.com/side_1.html
7
A side of house neutralizer does it have to be on the floor or can be anywhere along the wall?
---------------

Side protection Neutralizers should be above "protection from below" and below "protection from above" Neutralizer's elevation. In the same time both Neutralizers (Above and Below) need to be inside space created by "Sides protection" set of Neutralizers (walls).  These roles are valid for all areas of protection (apartment, home . . .).   

https://www.microalpha.com/total.html
https://www.microalpha.com/side_1.html

8
How it works? . . . Q & A / I need my cells not to be under stress to detox efficiently
« Last post by Mel on December 08, 2018, 02:45:04 pm »
I have an infrared sauna I have to use with high EMF, if I understand correctly the underground protection with personal protection will transmute any EMF burden. I need my cells not to be under stress to detox efficiently. I don't want to trade sweating for mitochondrial damage.
=========================

EMF protection must be always between you and the source of EMF (especially during recovery and resting/sleeping time).

In addition protection from below AN-4CVD works with basement mold  unless basement wall or floor is cracked and designated for that Neutralizer explained on web page - https://www.microalpha.com/dampness.html

Neutralizers for home EMF protection are explained here:
•   Step by step solution - https://www.microalpha.com/step-by-step.html
•   Single Room  Protection - https://www.microalpha.com/single-room-emf-protection.html
•   Apartment Protection - https://www.microalpha.com/apartment-emf-protection.html
•   Home Protection - below 2,500 sq ft - (including basement) - https://www.microalpha.com/home-up-to-2500-sq-ft.html
•   Large Home Protection - above 2,500 sq ft - (including basement) - https://www.microalpha.com/home-up-to-10000-sq-ft.html
9
How it works? . . . Q & A / Cellular Towers Total Home (apartment and room) Protection
« Last post by Mel on December 08, 2018, 02:28:23 pm »
We want to protect our home form Cellular Towers radiation. How can we protect it?  Your guidance will help us to take proper decision.
===================

We are providing total home/apartment/room or any other area EMF protection. Our products filter all incoming energy. This patented solution makes all energy from any EMF source in range from 0.1 Hz to over 300GHz harmless to any living creature (humans, animals, . . .  fish and plants).

You can use any wireless devices like cell phone inside protection zone without interruption.

There are two lines of products: Regular and Basic. All features for both are the same accept one – ability to absorb energy by Regular version is 10x of the Basic version. Basic version was designed to decrease cost of our products to be affordable for wider group of customers.

Recommendation: Regular version

You can buy whole set (Total protection set) or you can buy one by one all four devices for total protection.

In such case we suggest this order: 1 - protection from below, 2 - side protection set (set is less expensive than each device separately), 3 – protection from above.

Why total protection?

Cell tower sends signals in broad directions, also those waves are bouncing from e.g. walls plus you are expose to any others source of harmful EMFs like smart meter, Wi-Fi, wireless, power lines and power equipment. Also, you don’t know what EMF will rise in your neighborhood in future (as often happen for our customers).

In other words – we are proposing to close your home (apartment) in a “protection box”.

Prices are on our websites. If you need more information, guidance or suggestion – we are here to help.

Please check links below for more information

https://www.microalpha.com/total.html

https://cell-tower-protection.microalpha.com/


 
10
How it works? . . . Q & A / How MicroAlpha EMF Protection Works?
« Last post by Zibby on December 07, 2018, 11:37:21 pm »
MicroAlpha’s best EMF Filtering Technology provides 100% protection. It works like water filter. Passing through EMFs are harmless. You can find proof in nature - check https://www.microalpha.com/learn_basics.html#wa-anchor-iuajnj0997spls  - those plants are from protected garden.

Passing through means that original EMF wave is intact without losing integrity. All data etc. are not compromise. The same is with original Schumann Resonance affected by man-made EMFs.   Schumann Resonance remains the same. Do you know that Schumann Resonance frequency was shifted up to over 12 Hz thanks to rapidly decreased geomagnetic field (information on https://www.microalpha.com )

The same is in range from 0.1 Hz to 300 GHz – all EMFs (man-made or natural remain the same and clean). This was tested by Biofeedback and Vega resonance testing systems.

Summary: MicroAlpha products invented and build based on Quantum Mechanics principle don't stop (absorb, reflect etc.) any EMF wave. They just clean it up. So, you will have whole spectrum of EMFs (man-made and natural) with only one difference – your defense system accepts them now. Results – https://www.microalpha.com/learn_basics.html#wa-anchor-iuajnj0997spls – vegetable from protected garden are using energy previously wasted in fight with harmful EMFs. Now this portion of energy is used to grow – so they are much bigger than average – no any fertilizer or other boosting growth technique.

If you need more information – please let us know.
Pages: [1] 2 3 4 ... 10